The DLOS8N is an open source outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
DLOS8N supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol. DLOS8N includes a SX1302 LoRaWAN concentrator.
DLOS8N has pre-configured standard LoRaWAN frequency bands to use for different countries. User can also customize the frequency bands to use in their own LoRaWAN network.
DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
DLOS8N supports auto-provision for mass deployment and long term maintenance. We can easily change the settings.
Open Source Embedded Linux system
Managed by Web GUI, SSH via LAN or WiFi
Support Semtech UDP packet forwarder
Support LoRaWAN Station Connection
Cellular Failover conntection(option)
Direct Communication to LoRaWAN ABP Node
LoRaWAN packet filtering
Far seeing LED indicator
Built-in GPS module for location & timing
External fiber glass antenna
Power Consumption:12v ,300-500mA
Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
70 dB CW interferer rejection at 1 MHz offset
Able to operate with negative SNR, CCR up to 9dB
Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
Dual digital TX & RX radio front-end interfaces
10 programmable parallel demodulation paths
Dynamic data-rate (DDR) adaptation
True antenna diversity or simultaneous dual-band operation
10M/100M RJ45 Ports x 1
WiFi : 802.11 b/g/n
Power Input: 12 ~ 24 V DC, 2 A
IEEE 802.3 af compliant PoE port (DC 37 ~ 57 v)
USB 2.0 host connector x 1
Mini-PCI E connector x 1
SX1302 + 2 x SX1250