Why LoRaWAN?
Most monitoring needs the same thing: steady, reliable readings from sensors spread across a site, sent automatically and stored where they can be audited. LoRaWAN was designed for exactly that.
Years on a battery
Sensors typically run 3–10 years without a battery change, so there is no power cabling and no disruption.
Deep building penetration
Signals reach basements, stairwells, plant rooms and roof spaces where Wi-Fi and mobile signals give up.
Long range
A single gateway can cover kilometres outdoors, or several buildings in a dense estate.
Secure
Every message is encrypted end to end, with separate network and application keys for each device.
Open standard
LoRaWAN is a global standard from the LoRa Alliance, with thousands of certified devices from hundreds of makers.
Low running cost
No per-device mobile contract, and data that flows automatically into your systems.
Network design and managed networks
Your network, your way
Some projects are best served by a shared public network; others need a private network that is exactly where you want it, under your control and not shared with anyone. Many use both. We build all three.
- Site surveys covering roof access, power, mounting, line of sight and existing coverage, recorded scheme by scheme.
- Gateway placement design with RF planning, so every building is reached with overlap and a single failure doesn't leave a gap.
- Carrier-grade gateways, IP67 outdoor and indoor models, with cellular backhaul so the network doesn't depend on site broadband.
- Our own network server, or yours: device profiles, keys, decoders and integrations set up and maintained.
- A managed service: gateway monitoring and alerting, maintenance and support under a service-level agreement.
- Capital or operating cost: buy the network outright, or pay monthly as a service.
How we deliver
Survey and design
Site survey, device selection and a coverage plan.
Provisioning
Devices registered on the network, with decoders configured and tested.
Installation
Gateways and sensors installed by us or our installation partners.
Integration
Data delivered to your platform, dashboard or BMS over an API or MQTT, or to ours.
Monitoring and support
Ongoing network monitoring, alerts, reporting and support.
Solutions
Continuous monitoring for regulated buildings and infrastructure
Each solution works with certified LoRaWAN devices from leading makers, and all of them share the same network.
Emergency lighting monitoring
Automatic testing and live fault reporting, with a digital record of every test.
Learn more
Radon gas monitoring
Continuous radon measurement that replaces three-month passive detectors. Our own monitor is available to order.
Learn more
Utility meter reading
Automated water, gas and electricity readings with leak and tamper alerts.
Learn more
Legionella monitoring
Continuous water temperature monitoring at outlets, tanks and calorifiers.
Learn more
Damp and mould monitoring
Room-by-room humidity and temperature data that spots condensation risk early.
Learn more
Leak and flood detection
Point-of-leak sensors in buildings and level sensors for flood early warning.
Learn more
Fire, smoke and CO detection
Connected smoke, heat and CO alarms with live status across an estate.
Learn more
Air quality and CO₂ monitoring
CO₂, temperature, humidity, VOC and particulate monitoring for healthy rooms.
Learn more
Cold chain monitoring
Continuous fridge, freezer and cold room logging with out-of-range alerts.
Learn morePlanning a LoRaWAN network?
Tell us about the buildings or area you need to cover and what you want to measure. We'll come back with a coverage plan and the right devices.