Overview

Pls check carefull, there is many kind of choice in this link !!!

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.

CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support by Arduino®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.

Module HTCC-AM02

Feture

MCU：ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )

LoRa Chip：ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)

LoRa working band: EU_433, CN_470_510, EU_863_870, US_902_928

LoRa maximum output power: 21dB ± 1dB

Hardware resources: UART x 2; SPI x 2; I2C x 2; SWD x 1;ADC x 3; COMP x 1;12 – bits ADC; 8 – channel DMA engine;14 x GPIO

FLASH: 128KB internal FLASH

Interface: 1.27X(12X2 +11) stamp edge; LoRa Antenna (IPEX) x 1

Size: 20.32 x 20.32 x 2 mm

Low power design: Deep Sleep 3.5uA

433MHZ

868-915MHZ

CubeCell Dev-Board Plus HTCCAB02

Feture

MCU:ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )

LoRa Chip:ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)

LoRa working band:EU_433, CN_470_510, EU_863_870, US_902_928

LoRa maximum output power:22 ± 1dB

Hardware resources:UART x 2; SPI x 2; I2C x 2; SWD x 1; ADCx 3
12 – bits ADC; 8 – channel DMA engine
14 x GPIO

FLASH:128KB internal FLASH

Interface:Micro USB x 1; LoRa (IPEX) x 1
Size :50.9 x 22.9 x 8 mm

USB-UART bridge :CP2102

Battery Type :3.7V Lithium (SH1.25 x 2 socket)

Battery detection circuit:√

External device power control（Vext）:√

Low power design:Deep Sleep 3.5uA

433MHZ

868-915MHZ

CubeCell GPS-6502 HTCC-AB02S

Feture

MCU:ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )

LoRa Chip:ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)

LoRa working band:EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power:22 ± 1dB

Hardware resources:
UART x 2; SPI x 1; I2C x 1; SWD x 1; ADCx 3; COMP x 1
12 – bits ADC; 8 – channel DMA engine
14 x GPIO

FLASH:128KB internal FLASH

Interface:Micro USB x 1; LoRa (IPEX) x 1

Size: 55.9 x 27.9 x 9.5 mm

USB-UART bridge :CP2102

Battery Type: 3.7V Lithium (SH1.25 x 2 socket)

Battery detection circuit :√

External device power control（Vext）: √

Low power design

Deep Sleep :3.5uA

CubeCell 1/2AA Node HTCC-AB02A

MCU：ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )

LoRa Chip：ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262)

LoRa working band：EU_433, CN_470_510, EU_863_870, US_902_928

LoRa maximum output power：22 ± 1dB

Hardware resources：
UART x 2; SPI x 1; I2C x 1; SWD x 1; ADCx 3; COMP x 1；
12 – bits ADC; 8 – channel DMA engine；
14 x GPIO；

FLASH：128KB internal FLASH

Interface：Micro USB x 1; LoRa (SMA) x 1

Size：56.6 x 24 x 20 mm

USB-UART bridge：CP2102

Battery Type：3.7V Lithium (SH1.25 x 2 socket)

Battery detection circuit：√

External device power control（Vext）：√

Low power design: Deep Sleep 3.5uA

CubeCell Capsule Solar Sensor

MCU:ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )

LoRa Chip:ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262)

LoRa working band:EU_433, CN_470_510, EU_863_870, US_902_928

LoRa maximum output power:22 ± 1dB

Hardware resources:

UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA engine
6 x GPIO

FLASH：128KB internal FLASH

Interface：Micro USB x 1; LoRa (IPEX) x 1

Size：15mm diameter, 67mm in length

USB-UART bridge：none

Battery Type：.7V Lithium (solder pad)

Battery detection circuit：√

External device power control（Vext）：√

Low power design

Deep Sleep ：3.5uA

Debug Board（We suggest everyone at least need one Debug Board）

Sensors

BH1750 light intensity sensor

HDC1080 temperature and humidity sensor

CCS811B air quality sensor

BMP180 air pressure sensor

MPU9250 9-axis attitude sensor